Not Ranked
Cobrak
If I am not mistaken, I think I might have been the first to do that. At the TCC meeting in Austin this year, BDR like my idea so well that they took alot of pictures and was going to incorporate it in their cars. I ordered my car with the top harnesses not mounted, would mount them myself. Their design just looked like crap with those big eyebolts at your back. I just cut holes big enough that the plates from finishline would cover in the back firewall, mounted them. Then take the eyebolts ane drill and tap 7/16 fine thread holes on the flat bar that the rollbar mounts too. Should be four holes. mount the eyebolts, be sure to use a nut and lockwasher against the big flat washer for lockdown. The only thing is that if REG and BDR mounted your seatbelts for you they might have trimmed the excess strapping off and the will be to short to use thru the firewall. I would car REG then and see if couldn,t get some neww belts and some new carpet for the rear firewall to cover up the holes for the eyebolts, I promise tou wiil be very pleased with end product.
DON
|