Cracker When Keith built your engine and ALL the CRAP was flying I think you will find that I said he could and did hit the numbers you where looking for. My memory is fine, unlike you I don't know everything and ask alot of questions. If you looked at the old thread there was a question about the VE numbers and the running of 15.0-1 AF. You are NOT going to make the highest HP or Tork numbers at this reading unless there is new design and parts that just came out in the last 6 months. I ran programs when Keith took your challenge and was off by 8hp and 12ft of tork with the numbers that where on the thread. If you except everything you are told, you are a bigger fool than me. You probably think the country is in GOOD shape right now too, 10 million jobs lost to outscourcing is OK. Kuntz and KCR are at the front of the FE motor movement for more power. Like everything, things change. The old guard that built FE's back in the 60's are passing on. Alot of the info is not being saved or writen down, the new info that Kuntz and KCR are doing is secret right now because they make a living at this. Your right about getting IT. I want to get it RIGHT, unlike you. Hope you have a nice picnic, was there wine and cheese at the picnic for you?
Rick Lake