View Single Post
  #11 (permalink)  
Old 06-26-2006, 03:32 PM
PrecisionEngine PrecisionEngine is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jun 2006
Location: Hyattsville, MD
Cobra Make, Engine:
Posts: 2
Not Ranked     
Default Nice 331

First of all I would like to thank both Frank and Wilson for all of their props. It has been a pleasure dealing with everyone from the club. I thought I would jump in here and help out with any specifics you might want to know about frank's 428 or 302 or wilson's 331.

Back to Snakebit's question. The valves in the AFR 185 Street/Strip Outlaw heads are a 2.02 intake and a 1.6 exhaust. I did change the springs from what AFR originally had on them to compliment the cam that I chose. Which is a solid flat tappet with .250/.250 duration at .050. With a lift of .569/.569. This does sound like a lot of cam, but because this car is so light and a manual transmission, we can get away with that. Plus its supposed to sound badass isn't it?

Again thanks for all the support guys!

Michael Norris
Precision Engine Machine Co.
301-779-5808
Reply With Quote