[Lindy]

This particular engine has an Eagle forged crank and H beam rods, AFR 185 heads, JE pistons, Scorpion roller rockers, Edelbrock Air Gap manifold and a Holley 4150 650 CFM carb, as well as a Ram aluminum flywheel and clutch. We are running an MSD 6AL box and billet distributor. It is essentially their "standard crate 331".

According to Tony at Craft, this particular engine dyno'd at approximately 475hp and 449 ft lbs. (still waiting for the dyno sheet).

I am continuing to take it easy on the motor even though the dyno pulls have essentially broken it in, however it does feel pretty healthy - even without getting into it too much.

The car is an ERA/FIA with Trigos, etc.