Quote:
|
Originally Posted by Rick Parker
Maurice is right.
Check the "small" red lead going to the MSD box and see if it is getting 12 volts when the key is in the "Start" position (disconnect starter solenoid while doing this). If it isn't check the wiring at the switch and/or replace the switch. Make sure it is out of gear too!
|
I'll check the voltage later today. As I understand it, this wire is the one that supplies power to the "brains" of the MSD, and powers the red LED on the side of the box that signals it as being "on." This LED does indeed light up, but I cant vouch for the voltage yet.