Quote:
|
Originally Posted by Rebel1
Hi pezza, welcome to you and thanks for posting.
I also like the clean look of the RMC angled radiator but had heard some complain about overheating.
If you remove the radiator out thru the nose then it must be relatively narrow as the nose opening is about 640mm wide on the RMC.
Would you mind answering the questions in my previous post so I can make up my mind about this thing.
Cheers and good to see another RMC owner in here.
|
I'm not an expert on radiators in fact i know very little. mine was supplied by RMC and has been used in quite a few of their cars so i'm hoping they know what they are doing. Mine is not alloy but i have seen a RMC with an alloy radiator mounted in the same way. I will measure it tomorrow and give you sizes.