[PaulProe]

I too, am working on this problem. I spoke to Tremec tech support on Tues. morn. They told me they (Tremec) offer the short shaft kit (part no. TCKT 5729) but they do not install it as an option, nor do they have a transmission with it already installed. They rely on their distribution network to do that.

The also confirmed the 5/8" spacer plate as the alternative.

I have been looking for a picture of the spacer plate. I assume it is bored to match the OD of the input shaft collar, just like the bellhousing does. But does it have a lip on the face of it that slips into the bell housing or do you just rely on the bolts? Pictures are worth a thousand words.

I've been all over Lakewood's and McLeod's site but can't find any info on the spacers.

Thanks

Paul