[TWest]

Thanks AC and Mick.

I have been through an awful lot of the scratch builders forum and have gleaned some dimensions which will be useful but alas no drawings.

Mick, I have been in contact with Chuck concerning his drawings but unfortunately he will not sell individual drawings and I cannot really justify paying out $400 at this time. He certainly does seem to have it totally covered though and would dearly like to be able to get me a set but if you can´t you can´t.

Can I ask the meaning of DOM. Sorry I am not an engineer but a graphic artist and this is a term I am not familiar with.

Thank you again. I didn´t expect to get helpful repsonses so quickly.

Tony