[CSX 4027]

Tools required
1 inch steel square tube stock
3/4 inch steel round tube stock
5/8 inch grade 8 bolts/nuts
1/4 inch steel slat stockFender washers
Welding ability
3 hrs

You first mock up the seat into position with 2x4 wood blocks then determine either floor mount or seat track mount.

The rest will be detailed in diagrams and pictures but, experience in welding is a must.

It sounds harder than it is but it is the only way to get the seat at an optimum position.

There is no generic mounting. The seat is supposed to fit both you and the car like a custom tailored suit.