[priobe]

Hello all,

I am in the process of tuning my webers. I would like to get everything tuned and ready so I could just send out the body to get painted. Here is my situation.

The engine is a 427 side oiler and weber carbs. When the engine is idling I am getting a rich smell. When I rev the engine every so often I get a sneeze from the pass side front carb and driver rear carb. Also, I have noticed a flame from the carb would shoot up. Here is my specs on the carb.

Emulsion tube - F7
main jet - 160
air corrector jet 210
idle jet holder 120
idle jet 55- F10
choke 37
exhaust (bottom of bowel) 55

Also I am hoping that somebody can include the measurements for the float with the 10 degree manifold. Also, I have purchase an inovantive LM1 wide band analyzer to help with the tuning.

Please help.

Thanks