Fitted my sensor as per Brett's advise using an Earl's Adaptor (good Company to deal with by the way).
I had to replace the Z9 filter with a Z89A one as the Z9 would not fit as per another thread on this subject.
I did read that AU V8's with an
Oil Cooler use the shorter filter whereas a Z9 are fitted to the others. Not sure using a shorter filter will make much difference although I have noticed the car is now running with slightly less
oil pressure - may be because of the shorter filter.
Curious to know what the
oil temp should be for my motor. 5L EFI donk.
Any ideas?