Quote:
|
Originally Posted by BossCER
David,
I hope you will reconsider the bore sizes available. It is a product that I would consider for a future project providing providing we can get some serious cubic inches out of it. I once made the mistake of being hung up on the number (428 CJ) for a project and regret it still today. Like they say, there is no substitute for cubic inches. I believe you could greatly expand your market by giving this some serious consideration.
Good luck!
|
There are two ways to approach this plea:
1) Ask for an option for sleeves; if sleeved, you could make YOUR block ANY bore you want.
2) Convince the Kirkhams that making a larger bore block would require the removal of MORE of the billet aluminum making the block even LIGHTER.
I'd just bore out the block and install honking big sleeves, but that's just me.