[hound dog]

Bermblaster41,
Just ran the rough numbers through my Dyno 2000 and came up with 527 HP at 7,000 and 451 tq. at 5500. By going to the same cam I used (Lunati 51012 hyd. roller) the numbers changed to 526 HP at 5,500 and 6,000 with torque of 538 at 4,500. I think you may be a bit overcamed. Heads are OK though. You may have a small block engine but it is making big block cubic inches and you have to have the heads flow accordingly.
h dog