Thread: No ford 9 inch, what do you recomend
View Single Post
  #3 (permalink)  
Old 03-13-2007, 07:42 AM
simon clemens's Avatar
simon clemens simon clemens is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jun 2004
Location: Perth, AUSTRALIA, W.A
Cobra Make, Engine: Lucus shell, Arrow chassis, efi 5L HO, 5 spd supra, Diff 3.73:1, Rear tyres 275x60-15
Posts: 229
Not Ranked     
Default
I think that the good old B/W ford diff is plenty, Its what I have in mine, 28 spline, 4 pinion LSD, 3.73 diff ratio.
yeh I had it shortend to suit my application, cost me $100 for the 2nd hand diff (complete) EA falcon Disc. To shorten with new 28 spline axles, all brackets welded to suit custom suspention, tailshaft made & balanced all for $1800 total!!!

You can have it all done and fitted to your chassis for under 2k !!!

Some people put a hell of alot of street HP through these diff's without any problems. Another person I know has an un-cut B/W in his cobra, but the rim selection was not able to have any dish, I like the deep dished type rims, thats why I had mine shortened.

Hope this is of use to you.....

Simmo....
__________________
Black Rubber Needs To Be Layed
Reply With Quote