Thread: Intake gasket help please
View Single Post
  #6 (permalink)  
Old 05-31-2007, 09:04 AM
RedCSX1's Avatar
RedCSX1 RedCSX1 is offline
CC Member
Visit my Photo Gallery

 
Join Date: Nov 2003
Location: Fresno, CA
Cobra Make, Engine: Shelby CSX 4766 (Vegas Built) with 482 Aluminum Pond motor
Posts: 814
Not Ranked     
Default
DO NOT USE FEL PRO!!!!!!!!!!!! JUNK GASKETS enough said

Buy a Victor-Reinz part number 95158SG for MR or Victor Nitro Seal 95159SG.
Can purchase these gaskets at NAPA

Thin bead of grey silicone (motorcraft/ford brand) around water passages and at corners. 1/4 " bead at front and back rails, set intake and secure using right torque sequence. Let set for 2 to four hours or even over night.
__________________
Morgan LeBlanc
Fresno CA
Last edited by RedCSX1; 05-31-2007 at 09:09 AM..
Reply With Quote