[Rickd]

289ERAKit:
Keith Craft has some nice complete engine packages, and they're using top of the line components. I looked at their 306, with Performer RPM heads, but I really wanted to get the AFR 165's, so for a few dollars more, went with their 331 "econo stroker", which has AFR heads, SCAT cast steel crank, forged mahle pistons, RPM air gap intake, Quick Fuel tech carb, MSD ignition. This little motor should put roughly 350 HP at the REAR Wheels. $6400 complete (+ $600 for break in, adjust carb, timing, and dyno testing). Good luck and have fun!!! Rickd