[Bscott]

....."I cannot and will not let you call someone a liar when it is totally unjustified." I can point out a couple of lies for you....
"Headers don't fit right. No help." We have never refused him any help with his headers, he sent Don an e-mail regarding the issue on Monday, and received a response on Wednesday, does he think he is our only customer and should get an immediate response? Don is a very busy man and he answers all questions as quickly as he can. Maybe if Jerry learned how to use a phone he could get answers even quicker? "When I received my rack It was packaged in a Flaming River box. It is not a Flaming River rack, this was confirmed by the tech guy at Flaming River." I know for a fact we have never and will never take a rack out of one box and put it into a flaming river box. The racks that we get that are not flaming river come individually packaged in there own boxes and that is how we send them out. And since you are a machinist and you know how to measure, you should also know about tolerances, the amount that the pinion shaft is different from the u-joint is necessary, that is why the u-joint is slotted so it can be tightened onto the shaft...if there was no clearance how could you ever get the joint onto the shaft?? I think that you and Jerry both need to stop coming on here and trying to bad mouth our company and our customer service, Don and his company have an excellent reputation for customer service, but every now and then we get customers like you 2 who cannot be pleased no matter what we do, so there really is no winning in this case. Don already asked for this to end so that we could continue to help you and bend over backwards making sure you are happy, but apparently that is not the way you want to handle this. So good luck to the both of you, and I hope Jerry truly is happy with his car when it is finished.