69;
I looked at a set of Eagle I-beam rods today, not for a small block, but for a 460, still I would think they should be near identical in markings....here's what I found;
The rod itself looks just like a stock I-beam rod, casting marks down the side, it did have ES in raised letter on one side not SE....that I'm sure of.......took some pics, just have not uploaded them yet....
But the dead give-away is if it is an Eagle rod, it will have the 12 point ARP rod bolts, and the rod cap will not have a flat end like a factory rod, but a rounded machined rod cap.......
Look on page 4 in my gallery and at the top you should see a pic of my 331 short block, it has Eagle 4340 Forged H-beam rods and you can see the rod caps in the pic, they are identical to the I-beam rod caps.......
http://www.clubcobra.com/photopost/d...0/rods_002.jpg
hope this helps.....
David