BOB,
Thanks for the reply, I knew there was a master mind out there somewhere that would take up the challenge. Also, I knew there would be out there like
Zimmy who need to know. My drawing skills have gone downhill since my drafting days but this quick & dirty. 7/8" outside Diameter should give it a bore of 5/8" a longer cylinder Longer will fit, and larger diameter bore would probably lessen the pedal travel I have with the Girling slave cylinder. sorry I didn't include this before, the photo's are 10 years old.
Anxiously awaiting to hear from you or anyone else who might have the answer.
Zimmy, e-mail comming.
