[Jack Mack]

Bill, I replaced my Contemporary floor mounted master cylinders with CNC units with s/s bores. The clutch is a 7/8ths bore and both brake cylinders are 3/4 in. bores. These were a direct bolt in replacement for those no name units that came with the car when new in '93. I remember that I had to use the push rods from the original units as two of the three supplied with the CNC units were the wrong length (no sweat).Call the Chassis Shop @ 1-800-530-9494 Order CNC part # 712-7-8 for the clutch and 712-3-4 for each of the brakes. In July of "00 they were 54.60 each. Hope this helps
Regards, Jack