The fittings are primarily Aeroquip. In some of the more complicated places I had to shop around a little with other suppliers to get exactly what I needed. The Weber banjo's are in fact aeroquip. They are only available in -6 and in blue and red. I usually use oven cleaner to take off the color but on these I used pecan shells in my blasting tank. Then I finished them with a brass wire brush. I was concerned with the size of the fuel line with a 600hp engine so I am using a 14 psi holley pump with a bypass regulator set at 3 psi. This provides tremendious volume at low pressure. This little unit came from Kinsler Fuel injection.
__________________
High Maintenance Racing Team
Run & Gun 2003 - 2013
|