[RACER X #99]

I agree with Bob on the CF clutches. I think some people may have used the wrong throwout bearing and damaged the weights.

I have gone thru a Ford Cobra clutch and a CF dual friction doing open track exclusively with 600+ FWHP.
I contacted CF and they reccomended a clutch that was HP rated and this clutch is working just fine. I have the clutch out right now and it is in perfect condition. The flywheel shows no signs of slippage.

The part # is DF 920830 but I am using a tremec 3550 and it is a 10 spline disc so you may have to get a different disc. with your trans.

Give CF a call and they will tell you which clutch you need based on HP.

Those Long and B&B clutches are old school Ford/ Chrysler clutches.

RD