Scott,
Thanks for the info. Sounds like a great setup you have. Let me know how it works out on the street. Hell, I have another 5-months before I can do that.
I spoke with Mike at Shelby again and have finally made a decision!!!!!!!!
He had recently dyno'd the Edelbrock Performer RPM in one of his 4.25 strokers with great success. H.P. was around 540 and Torque came out around 560, AND, was able to acheive idle around 950 RPM................. very streetable in his view. All this with the weight of a small block! Can't wait to see how it performs. (fingers crossed)
The cam specs are 296 Duration and .572 Lift.
Thanks to all of you for your help. I truly appreciate your input.
Regards,
John