[sideshow]

ok cool

late model vehicle communications between ecu and dash is very complicated

very hard to get things to talk to each other

on fords there are 2 wires from ecu to dash and these 2 wires usually has the informaton for

temp gauge
tacho maybe
fuel sometimes

so maybe if u get time look into it cause might end up with only half the dash working

i recently wired a monaro dash into an eh with an ls1
had to wire up the bcm and the pim whiich are the small computers that talk between the engine ecu and the dash and convert signals and stuff so everything works properly

anyway see how u go