Not Ranked
I have used mine once to remove a severely jammed knock on on my AK. Worked like a charm. Not a pretty a set up as the 2 prior emails, used a small diameter steel bar through the bars, leaned into the boss with my knee and one up/one down. Did have to mind the bar slipping in the through holes though. Antiseise, appropriate use of hammer and safety wire means never having to use it again I hope. AK guys in England have made up one by cutting slots in a 3" steel socket and fitting a breaker bar. I would be careful with a 3/4" impact...although I had pounded on one ear so hard it had to be the equal of that.But the impact is going to put rapid repeated blows on the knock on simutaneously on all three ears, but I'm not an engineer.
|