Thread: 427 stroker build
View Single Post
  #10 (permalink)  
Old 02-02-2008, 03:13 PM
427supr 427supr is offline
CC Member
Visit my Photo Gallery

 
Join Date: Jan 2007
Location: Chesterland, oh
Cobra Make, Engine: Superformance #046 Dart 427w
Posts: 76
Not Ranked     
Default
I am running Edelbrock Victor Jr. type heads with a 60cc. My engine builder has Reed Cams do custom grinds on whatever the customer is looking for. I would like to run a hyd. roller, and rockers. I am not sure yet on the lift and duration. A Edelbrock Super Victor or maybe a dual plane. Any suggestions on a good dual plane for this build? Holley 750 with mech. secondaries. Hoping to be around 550 HP. I will stick with my current tremec and 3.73 rearend. Mostly using cobra for the street.

Build so far:
Dart Iron Eagle block 4.125 bore
Scat forged 4340 crankshaft. 4.000 stroke
Summit forged 4340 H-beam connecting rods/6.200 inch
Victor Jr. type aluminum heads. 60cc
Last edited by 427supr; 02-02-2008 at 03:16 PM.. Reason: adding info
Reply With Quote