Not Ranked
The I.D. of my sleeves is 2" and there is about 1/8" of slop where the stud goes through the spindles so I am pretty sure I got the wrong ball joints. I only bought 2 so at least that is a good thing.
I did have the wrong spindle in the picture, i just grabbed the nearest one when I was trying to mock eveything up. I also realized that I don't have any droop, my coilovers are maxed out and the lower arm is horizontal. I have to shorten the arms one inch and I am also going to lower my shock tower a bit to see if that helps...thank God everything is just tacked together 
__________________
"Me fodder was King Neptune, me mudder was a mermaid. I was born on the crest of a wave and rocked in the cradle of the deep. Me hair is like hemp, me arms are like spars. When I spits, I spits tar. I'm hard, I am, I is, I are. "
Last edited by joey_hv; 02-17-2008 at 09:44 AM..
|