View Single Post
  #5 (permalink)  
Old 05-05-2008, 10:23 AM
jwd's Avatar
jwd jwd is offline
Senior Club Cobra Member
Visit my Photo Gallery

 
Join Date: Feb 2004
Cobra Make, Engine:
Posts: 1,226
Not Ranked     
Default

Quote:
Originally Posted by The cobra lady View Post
We've been building the Hurricane but had so many problems with the quality and parts that we switched to B&B. We now have 2 in our shop. Bryan produces true quality in his chassis and body. I hope the new owner of Hurricane will have some quality control. We have Cobras that the doors open 30" and we have another that opens 18". Every kit from Hurricane is different. B&B makes 50 parts at a time and they're percise. It's so easy to work with a company that's been in business a long time and is past the learning curve! Thanks again for the info.

Bonnie

Bonnie,

It's interesting that while you were selling Hurricane's, they were the best thing going. Now that you changed kits, because Hurricane stopped building for a while, your story has changed.
Regarding the door opening issue, if you checked the Hurricane forum you would have found that there was change in the moulding around the hinge that required a little trimming of the door sill to allow the door to fully open. No offense but if your builders aren't smart enough to figure that one out on their own they certainly don't have the skill to build a GTM as they required alot of fabricating and problem solving.

Jim
Reply With Quote