I am not sure as to which ones are not firing. I am not the one working on it. I ended taking the car a few months back to a shop but it seems as if the guy is having problems with the carb tuning.
I am reaching out as much I can to help him resolve this problem but end result will benefit me.
I will suggest changing plugs and adjust mixture screw, but he has indicated that when you rev the motor and hold it at 2 k the pipes start to glow.
He wanted to properly adjust the floats with that device but Rick has indicated its only for IDA 48 3 C.
I am also looking for a Weber expert in the South Florida area to help us out with this situation.
This gentlemen has recommended to use the TWM injection but I really dont want to spend the money if its not needed. Besides, I only want to chance to efi if someone can proove that there is something wrong with the carbs.
Please I am looking for suggestions.
I have invested too much money with this guy to pull it form him at this time. Besides where will I take it.
I have tired to tune these carbs and now I have been paying someone to tune them so, something is not right.
Suggestions,