i know a little more than i did a week ago. the original engine was controlled by a map sensor. the cams that were sent were ment to be controlled by a mass air flow sensor. now what i'm trying to do is to find a roller cam that is controlled by a map sensor. i know that roller 302's were used starting in 86 and that all were run by map sensors until 93 when they switched to mass air flow. seems that it shouldn't be that hard to find a cam to work in the bronco
i've contacted a couple of friends that fool with computer cars and i'm waiting to see what they come up with. tried all kinds of sites on the web but no one seems to know anything-good or bad. we'll see what happens.
paul