[macloft]

Merv & Sambo
I did this myself but I am in Texas right now and dont have the wiring diagrams to share with you however.
I got quite a bit of info off 07COB. He was bloody helpful email him.
I ended up using the painless headlight switch as the laser one got to complicated. This balanced the wiper switch out on the dash which I also used from painless The ignition switch is easy follow side shows comments. The hazard light can be used along with the indicator. There must be a range of wiring codes for lasers as I found many different ones and in the end did just what side show says but try 07COB. If not, I am back in 2 weeks and can send some photos.
Bruce