07-21-2008, 07:22 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Aug 2004
Location: Near Phila. (Collegeville),
PA
Cobra Make, Engine: CSX2498 has been in our family garage since '68....Scratch built aluminum bodied 427SC Cobra, 427FE, CSX3000 chassis specs, 95% finished, only needs paint.
Posts: 642
|
|
Not Ranked
slave cyl. bracket
Hello, here is a photo of a slave cyl. bracket I made for a 289 Cobra with a original 5 bolt COBRA bell housing. It is a piece of 1/4" x 1.5" angle with a slight curve to match the arc of the bell and a mounting point for the CNC slave cyl. It can not be too much different from what you need.
regards, karl
http://www.clubcobra.com/photopost/d...s/HPIM0850.JPG
Last edited by KarlCSX2498; 07-21-2008 at 07:26 PM..
|