Quote:
|
I do it all the time. I usually tape around where I want to cut and then use a thin cut-off wheel. I like to use electrical tape and cut through the tape and line, that keeps the wirebraid from becoming unraveled. I use WD40 as a lube when "sliding"( pushing/turning) the hose onto the fitting. Never had a leak. After the first couple it gets pretty easy.
|
I do it this way as well and no problems. I like to use blue painters tape first then electrical tape over it for the cut. That eliminates the sticky residue on the hose from the electrical tape.
Here's a link from Earls with a how-to video :
http://www.anplumbing.com/installation.html
Matt