[LRRCobradreamer]

I want to say thanks to all at Komet Motor Sports for the tune up on my Cobra today. Great work guys.

Kurt, Frank, Jerry Clayton and his son worked on my Cobra until the Cobra broke the dyno. Ha Ha. No, had a problem with a connector and could not get the speed sensor to work after 4 pulls. We got most of it done and I am sure the dyno will be fixed next week. The numbers are not impressive, but the torque curve is flat as a table.

Started at 233.5 rwhp and 228.6 rwtq.

Finished at 256.4 rwhp and 246 rwtq at 3476 rpm.

Torque is 240 ft-lbs at 3200 rpm and does not drop below 240 ft-lbs until 5200 rpm. Even at top speed of 5970 rpm the torque was about 230 ft-lbs and the plot starts at 2500 rpm at 220 ft-lbs of torque. Flat as a table and torque IS acceleration, not horsepower. This car pulls right upto the rev limiter, no drop off you can feel by the seat of your pants.

Thanks again, Lee