Quote:
Originally Posted by Woodz428
If the driveshaft isn't installed, he didn't mention that it was, how does the pinion angle affect the travel of the axle housing? I understand how it could with the driveshaft acting as yet another pivot, but without it I don't.
|
He was talking about after it was installed, however, if the arms are wrong or have other problems, that will affect that too, before it's installed.
I now have a set of fully adjustable "after market" upper and lower control arms. I am confident my problem is solved now.
I also discovered the driver side lower control arm (from Street Beasts) is bent outward, adding to the other problem. It will go in a junk pile now.
The build continues......
