Quote:
Originally Posted by strictlypersonl
Those look interesting, but I don't have the specs for either the Trigo or Vintage lug nuts at hand. Both diameter and length are critical. The holes in the wheel come very close to breaking through to the outside surface so the hole depth in the wheel cannot be increased. And obviously, the diameter's clearance in the hole must be within about 0.010"...
|
My Trigo pins are 1-3/16" long, 3/4" diameter. I'm not sure what the hole measures on the wheels. I could waltz my ever-increasing rearend out to the shop and measure them but it's cold out there!
Larry