Not Ranked
Quote:
Originally Posted by ccomt
Does anyone know where you can get BRASS SCREW-IN freeze plugs?
|
I would use a screw-in freeze plug of the same material as the block.
That is if I decided the press-in plugs were inadequate, or if I were filling the water jackets of a drag motor.
There is nothing to gain for 99% of applications, but you do lose the mechanical overpressure vent for the block.
__________________
In a fit of 16 year old genius, I looked down through the carb while cranking it to see if fuel was flowing, and it was. Flowing straight up in a vapor cloud, around my head, on fire.
|