Thread: wiring da thing !
View Single Post
  #4 (permalink)  
Old 07-16-2009, 02:45 AM
Rebel1 Rebel1 is offline
CC Member
Visit my Photo Gallery

 
Join Date: May 2002
Location: Brisbane Australia, QLD
Cobra Make, Engine: RMC under re-construction, GenIV with tremec 600, Jag 3.31 L/S diff
Posts: 3,318
Not Ranked     
Default
As said on the earlier thread posted by Merv I used a painless harness and was super happy. I did made my own dash harness ... ie for all the gauges.

I guess what needs be said is that the harness is just that ... a basic harness which will get things working but by no means all that is needed for a good install.

I don't worry about the gauge of the wire as I relay almost everything. But I am paranoid about wire quality. Obtain the harness of choice but plan other expenses for relays, terminals, plugs etc.

The Column may take some thinking but a cool head and good test light or multimeter will get you done.
__________________
It's impossible to soar like an eagle when you're surrounded by turkeys.
Last edited by Rebel1; 07-16-2009 at 02:49 AM..
Reply With Quote