Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Advertisers Forum (http://www.clubcobra.com/forums/advertisers-forum/)
-   -   New Upgraded TKO 500/600's Now Offered... (http://www.clubcobra.com/forums/advertisers-forum/100901-new-upgraded-tko-500-600s-now-offered.html)

blykins 11-17-2009 04:31 AM

New Upgraded TKO 500/600's Now Offered...
 
B2 Motorsports can now offer TKO 500's and 600's with upgraded torque capacity.

We have two options for each transmission: "Semi Pro" and "Pro".

The Semi Pro transmissions will be brand new transmissions from Tremec. These will be disassembled and upgraded with bronze fork pads and cryogenically treated gears. These transmissions will also receive our "Sure Shift" upgrade where the cones on the gears are modified and the shift forks are upgraded to ensure quick shifting at higher rpms. This modification will add approximately another 100 lb-ft of torque capacity to the original capacity of the transmission. This brings the TKO 500 up to 600 lb-ft and the TKO 600 up to 700 lb-ft.

The Pro transmissions will have the Semi Pro upgrade, the Sure Shift upgrade, and will have the 1st-4th gears, sliders, and hubs REM treated. This adds an additional 10% torque capacity/life to the transmission.

We can also upgrade your existing transmission with either option.

Short input shaft and mid shift upgrades are also available.

If anyone has any questions, you can post here or send me an email.

Along with the transmissions, B2 Motorsports is a distributor for McLeod, RAM, Hays, Lakewood, Quicktime, Hurst, Astro Performance A-5 Transmissions, G-Force Transmissions, PRW, Probe Pistons, Quick Fuel Carbs, and Jones Cams.

lovehamr 11-17-2009 04:38 AM

OK Brent, what's REM treatment? Issat where you dream about'em? :D

Seriously though, I have no idea what that is in terms of treatments.

Steve

blykins 11-17-2009 04:55 AM

Steve,

It's REM isotropic finishing.

The short and skinny of it is that the parts are chemically treated, then tumbled. This removes the "peaks" from the parts and just leaves the "valleys". This produces a smooth microfinish and reduces friction, noise, and vibrations.


All times are GMT -7. The time now is 04:16 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: