The official PAY IT FORWARD thread...

[vanoochka]

Two wheel center caps as sold by Finishline, each aluminum with AC logo.

Original-look shifter (replaced it with a Jordan) off of a Tremec TKO. Gone

Steering wheel center cap (small nick) with AC logo.

[cobra77]

I'm interested in the AC steering wheel center cap.
Thanks,
Chris

[trularin]

Okay, this is the PAY IT FORWARD list 11-10-2009 @ 8:07 pm EST.

You might be aware, Dean is out of the country for a week.

1. Superformance front marker lenses, clear/white type (Lucas with fluted lense and chrome trim ring); 2 pairs available (see Dean or Rodney)
2. 2 Piece Rear Seal kit for a 351 Windsor; 2 kits available (see Blas).
3. FE/Windsor March Performance 2 groove water pump pulley; 6" dia hi-flow model; part# 1562 (see undy).
4. I have both a 19 and 17 tooth driven speedo gear for a Tremec T600. Let me know if anyone needs them. I will cover postage (see DCDoug).
5. 2 round red tail light lenses that are glass they say "England" and have the number 488 on them; have the 2 trim rings that go with them these are the ones that the rubber grommet holds them in place (see RustyBob)
6. FE engine (complete) in the back of the barn off my crane. (see trularin).
8. 3550 (with shifter) that has a crack in the main case that you can use for parts. Not sure what shape it is in because it was given to me. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
9. 99% of the complete stock heater assy "used" for a CRL C427 (see Terry).
10. set of stock ceramic coated SPF side pipes. They need some cracks welded up. (See Silverback51).
12.Two wheel center caps as sold by Finishline, each aluminum with AC logo. (See vanoochka )
14. Steering wheel center cap (small nick) with AC logo. (See vanoochka )
16. A new Duraspark ignition module. ( See Blas )
17. I have the ROTOR, CAP, and the PLUG WIRE COVER new never used for FE? ( See rustybob )
18. 6 70s Vintage Road America Pit/Paddock passes from Road America (see Chris)
19. Cobra valve covers. ( See springin )
20. Cylindrical Radiator Catch Can. (See Jay 289ACE)
21. Polished alum. air cleaner. ( See springin )
22. Numerous new anodized braided line fittings. ( See springin )
24. I have a Lincoln Mark VIII fan in excellent shape. ( See Mohuska )
25.I have several radiator shrouds w/fans, 2 are the Taurus high output ones, one I think came from a Mustang....pictures available upon request.....I will try and get pictures to post as soon as I can....also have one shroud without fan....Earl
25. I still have an early set of 260 heads available - One is an Oct '62 casting and the other is a Nov '62 casting. ( See Nope It's Fake )

Please include the item number with your post.

Please look over the list and make sure things are correct.

Guys, help me here, put the item number somewhere in the post.

If it is in red, it is going or gone. If it is gone, please post it.

[David Kirkham]

Hey Guys!

Started digging around today. Sorry I didn't reply yesterday. I forgot to mention we didn't have power yesterday as we were switched from Rocky Mountain Power to Provo City Power. So, we didn't work yesterday and I decided to go and exercise my 2nd Amendment rights at the Provo range with my boys and some friends

I just found 1 FE water pump pulley (single pulley). March, billet aluminum, 6 inches in diameter.

I'm sure I'll find more goodies. On all our parts posted on this thread, you only need pay shipping

David

[Randy Rosenberg]

One set of 4 aluminum Trigo knock-offs - these are the knock-offs only, no adapters or wheels.

[Blas]

Randy,
Are these Trigo or WAW...If Trigo's I'm interested...(Note to everyone - the ko's are different and not totally interchangable)

[Blas]

Please add a new Duraspark ignition module to the list of available items...

[RedBarchetta]

The list is growing nicely...hopefully others needing some of this will chime in (and update it, accordingly.)

Which gets to the age old struggle of wants vs needs. Example: I really want an extra AC logo'd center cap to have on hand in the event that I lose one and find myself needing it. But since I don't really need it at the moment, I'm not going to PM vanoochka for one of the two he is offering up. It would just move from his tool cabinet to mine...not much benefit.

Just please keep this in mind when you see something that catches your eye. Otherwise, the hoarding mentality that is in most of us will short sheet the one enthusiast out there that might actually need it more.

-Dean

[Got the Bug]

Originally Posted by RedBarchetta

The list is growing nicely...hopefully others needing some of this will chime in (and update it, accordingly.)

Which gets to the age old struggle of wants vs needs. Example: I really want an extra AC logo'd center cap to have on hand in the event that I lose one and find myself needing it. But since I don't really need it at the moment, I'm not going to PM vanoochka for one of the two he is offering up. It would just move from his tool cabinet to mine...not much benefit.

Just please keep this in mind when you see something that catches your eye. Otherwise, the hoarding mentality that is in most of us will short sheet the one enthusiast out there that might actually need it more.



-Dean

Too funny!! I thought the same thing when I saw Vanhoochka's (Chuck's) post about the center caps. Don't need...but I might need someday. As you said Dean, no need to just be moving stuff between garages if it's not going to be used.

[rustyBob]

I agree 100 per cent.........

[Nope It's Fake]

Vanoochka - I'll take the shift lever if it's still available (sent you a PM). I'll post something in return after I take another look through my stuff.

Thanks!

[rustyBob]

I found in my garage a NEW rotor,cap,and wire cover fo the Accel HEI for an FE.
the kit part # from Summit is ACC-8348 they are NOT in the proper box because
i changed over to the stock GM points type cap and rotor.
they came with my dist. when it was new.
again i have the ROTOR, CAP, and the PLUG WIRE COVER new never useed.HEI style

[David Kirkham]

Count us in! I'll start digging around tomorrow. I have a feeling we have a lot of parts we can throw into the pot.

David

[undy]

Originally Posted by David Kirkham

Count us in! I'll start digging around tomorrow. I have a feeling we have a lot of parts we can throw into the pot.

David

I'll take that Kirkham roller you have sitting over there in the corner of the shop that you just don't know what to do with .. already got the TKO and 482 ready to go

[James Stern]

David, That was a VERY interesting email. I would bet that you might have a few more bits than the rest of us have.

Jim

[RedBarchetta]

Originally Posted by David Kirkham

Count us in! I'll start digging around tomorrow.

David

Gosh, David. Even your throw-aways are going to create a stampede!

I just hope that everyone stays true to the cause. Thanks for offering up some bits for those that truly need them!

-Dean

[trularin]

Dang, if you round up all the engine parts for an FE, you could have near complete engine.

Dean, wake up!

[trularin]

Here is the new list. If you are accepting something, please post it. If you were missed, please post it. If you are adding something, please post it.

Dang, all this stuff and no takers.

1. Superformance front marker lenses, clear/white type (Lucas with fluted lense and chrome trim ring); 2 pairs available (see Dean or Rodney)
2. 2 Piece Rear Seal kit for a 351 Windsor; 2 kits available (see Blas).
3. FE/Windsor March Performance 2 groove water pump pulley; 6" dia hi-flow model; part# 1562 (see undy).
4. I have both a 16 and 17 tooth driven speedo gear for a Tremec T600. Let me know if anyone needs them. I could send by next week and will even cover postage (see DCDoug).
5. 2 round red tail light lenses that are glass they say "England" and have the number 488 on them; have the 2 trim rings that go with them these are the ones that the rubber grommet holds them in place (see RustyBob)
6. FE engine (complete) in the back of the barn off my crane. (see trularin).
7. SROD 4sp top loader (3sp w/overdrive) with shifter. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
8. 3550 (with shifter) that has a crack in the main case that you can use for parts. Not sure what shape it is in because it was given to me. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
9. 99% of the complete stock heater assy "used" for a CRL C427 (see Terry).
10. set of stock ceramic coated SPF side pipes. They need some cracks welded up. (See Silverback51).
11. Two pair of early 289 heads. (See Nope It's Fake) ***************** See below
12.Two wheel center caps as sold by Finishline, each aluminum with AC logo. (See vanoochka )
13. Original-look shifter (replaced it with a Jordan) off of a Tremec TKO. (See vanoochka )
14. Steering wheel center cap (small nick) with AC logo. (See vanoochka )
15. One set of 4 aluminum Trigo knock-offs - these are the knock-offs only, no adapters or wheels. ( See Randy Rosenberg )
16. A new Duraspark ignition module. ( See Blas )
17. I have the ROTOR, CAP, and the PLUG WIRE COVER new never used for FE? ( See rustybob )

Would LuvDaBlues please confirm you have taken the heads. What will you pay forward?

[LuvDaBlues]

Originally Posted by trularin

11. Two pair of early 289 heads. (See Nope It's Fake) ***************** See below

Would LuvDaBlues please confirm you have taken the heads. What will you pay forward?

I'll take the heads and sort through some items this weekend. Gaskets, alternator, misc. stuff.

[trularin]

Here is the new list. If you are accepting something, please post it. If you were missed, please post it. If you are adding something, please post it.

1. Superformance front marker lenses, clear/white type (Lucas with fluted lense and chrome trim ring); 2 pairs available (see Dean or Rodney)
2. 2 Piece Rear Seal kit for a 351 Windsor; 2 kits available (see Blas).
3. FE/Windsor March Performance 2 groove water pump pulley; 6" dia hi-flow model; part# 1562 (see undy).
4. I have both a 16 and 17 tooth driven speedo gear for a Tremec T600. Let me know if anyone needs them. I could send by next week and will even cover postage (see DCDoug).
5. 2 round red tail light lenses that are glass they say "England" and have the number 488 on them; have the 2 trim rings that go with them these are the ones that the rubber grommet holds them in place (see RustyBob)
6. FE engine (complete) in the back of the barn off my crane. (see trularin).
7. SROD 4sp top loader (3sp w/overdrive) with shifter. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
8. 3550 (with shifter) that has a crack in the main case that you can use for parts. Not sure what shape it is in because it was given to me. Whomever wants it pays shipping from Manteca Ca. 95336 - (see tcrist)
9. 99% of the complete stock heater assy "used" for a CRL C427 (see Terry).
10. set of stock ceramic coated SPF side pipes. They need some cracks welded up. (See Silverback51).
11. Two pair of early 289 heads. (See Nope It's Fake) ***************** Gone
12.Two wheel center caps as sold by Finishline, each aluminum with AC logo. (See vanoochka )
13. Original-look shifter (replaced it with a Jordan) off of a Tremec TKO. (See vanoochka )************Gone.
14. Steering wheel center cap (small nick) with AC logo. (See vanoochka )
15. One set of 4 aluminum Trigo knock-offs - these are the knock-offs only, no adapters or wheels. ( See Randy Rosenberg )
16. A new Duraspark ignition module. ( See Blas )
17. I have the ROTOR, CAP, and the PLUG WIRE COVER new never used for FE? ( See rustybob )