01-25-2010, 10:33 AM
|
 |
CC Member
|
|
|
Join Date: Dec 2000
Location: Broken Arrow. OK ( South Tulsa), USA,
OK
Cobra Make, Engine: 66 COBRA FE 427 /4SP. (HCS Coupe w/ 408 Stroker and TKO 600 -sold)
Posts: 5,595
|
|
Not Ranked
Quote:
Originally Posted by Tom Cimino
It could be that the release agent used in the mold when the body was laid up was not properly cleaned from the body surface before painting. The paint would feel "loose" if that's the case. Purely cosmetic, but will need to be stripped and repainted to be repaired correctly. I would bet there are other areas on the body but don't show, due to the fact that they are not exposed to the sidepipe heat.
|
Just a guess here but if the primer coat was not a urethane based catalyzed primer that could be the cause of the problem. I would enjoy the car for the summer and maybe look at repainting it next winter.
Clois
__________________
Sunshine, Asphalt and no stop signs...Perfect
"Let's roll"
"Be part of Something Good
......Leave Something Good Behind!"
from CD "Long Road Out of Eden"
|
Hybrid Mode
