| bakbutler |
02-09-2010 10:33 AM |
Arthur
I have a rear anti roll bar supplied by Ron Butler. It mounts completely different than the one you are showing. Will try to take pics this afternoon.
If you know how to contact Ron, it might solve your problems.
Leo
|
| bakbutler |
02-09-2010 12:54 PM |
Have sent you an E mail. I hope the pictures come out ok
I haven't figured out how to post pictures yet.
Leo
|
| lal Naja |
02-09-2010 05:44 PM |
Quote:
Originally Posted by bakbutler
(Post 1027145)
Arthur
I have a rear anti roll bar supplied by Ron Butler. It mounts completely different than the one you are showing. Will try to take pics this afternoon.
If you know how to contact Ron, it might solve your problems.
Leo
|
I spoke to Ron today, He is such a cool gentleman. Your car should have a 7/8" sway bar and it is a performance unit made for the front of the MGB. Ron modifies it and supplies the heim-joint links to make the connection. He still has some in stock at $495.00 for the kit.
Thanks for your input Leo.
Arthur |
| lal Naja |
02-09-2010 05:47 PM |
Quote:
Originally Posted by mickmate
(Post 1027077)
Yup there's a few Kiwis from the early Shelby days. I'm continuing traditions.
|
I spent 17 years of my younger life in OZ. Perth |
| lal Naja |
02-09-2010 05:52 PM |
Quote:
Originally Posted by mickmate
(Post 1027046)
I see a big ol frame and an X member. Not down under down beside ;-)
|
I understand that the frame was designed to accept 700HP1??? |
| lal Naja |
02-09-2010 06:53 PM |
Quote:
Originally Posted by Tony Radford
(Post 1026686)
Arthur, I installed a rear swaybar on my car after eight years of driving withiout one. It made a huge difference on the twisty mountain roads. I have a Unique car which uses the Jag IRS rear end as standard. They have an anti swaybar kit they set up for their cars. I would think it would work, but you can contact Alan Weaver there to make sure.
Good luck, Tony
|
Thank you Tony for the enlightening test report. I'm going to stick with what I have purchased. I have the Stock Car Products sway bar on the front and I really like the setup. Some time next week I will start the modifications necessary to install it through the chassis.
Arthur |
| joyridin' |
02-09-2010 07:45 PM |
So...why did you bother asking what everybody is using if you already had your mind made up on what you were going to do from the beginning?
Why not just tell us what you had planned, then ask opinions? Sheesh! I jacked the car up and crawled underneath for nothing and somebody else even took pictures. What a waste of time.
|
| lal Naja |
02-09-2010 08:56 PM |
Quote:
Originally Posted by joyridin'
(Post 1027348)
So...why did you bother asking what everybody is using if you already had your mind made up on what you were going to do from the beginning?
Why not just tell us what you had planned, then ask opinions? Sheesh! I jacked the car up and crawled underneath for nothing and somebody else even took pictures. What a waste of time.
|
I sincerely, sincerely apologize for any difficulty I caused you or other members. My mind was not made up at all, and it was only tonight after I spoke with Ron Butler that I partially convinced myself on the route to take. All the options people have shared have been enlightening.
Arthur |
| All times are GMT -7. The time now is 12:20 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
