|
Air Filters for Turkey Pans
Where are most folks buying air filters and air filter bottom plates that are 8 inches and fit inside a turkey pan?
What performance improvments will you notice with a more open air filter? Cooler engine at low RPM?? Thanks in advance Paul |
You can get them at summit racing. There are three that most people use. All will fit the diameter of the S&H air cleaner, but they are different heights. I actually bought all three and then returned two of them. In order of preference (these are the summit part numbers):
KNN-E-1015 (tallest, flows best, but didn't give me enough clearance with my hood scoop) KNN-E-2570 (second tallest, just slightly taller than the stock foam filter and fit my car. This will probably fit most cars. I actually put the screen back around this filter so it looks somewhat original) KNN-E-9181 (shortest, this is probably almost the same height as the stock foam filter, but would flow the least well) Doug |
Thanks Doug. I apprecicate the help. Been looking at the Summit site.
Paul |
If you don't want to wait (Summit may need to order it), finishline has the 2570's in stock, but charges about $10 more.
|
Gotcha. Thanks again.
Paul |
I just got a couple of the 2570's off flea bay for short money.
|
I made my own turkey pan. But in order to attach an element of Italian flair!, I used a Lasagna pan from a restaurant supply. I fabricated all the components and made sure that I could get off the shelf oval filters to fit. The filter I found was 2" high. I thought I would be happy with that. I then found that K&N made the same size filters 2" high and 4" high. Unfortunately the 4" model was too high to fit.
But guess what? K&N will custom make virtually any filter for you. I had them make a couple 3" high oval filters for me. $65.00 each. And quality is just perfect. Arthur |
There's also the K&N 4720, which is between the 1015 and 2570 in terms of height coming in at 2.125" high. Note that Summitt shows the 2570 as 8.188" diameter where the others are 8".
Matt |
Quote:
|
| All times are GMT -7. The time now is 06:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: