PRO5.0 Shifter in SPF

Excaliber · #1 (**permalink**) 05-30-2010, 09:18 AM

Asp, thats the same way you pull the trans cover on an ERA as well. I understand the big difference is the sealing agent on the SPF. ERA use's a simple weather stripping type thing that is glued to the trans cover.

Yeah, 2, maybe 3 hours, it's still a pain in the butt. Moving the carpet, taking out the seats, etc. Easy, but what a hassle at the same time.

Great Asp · #2 (**permalink**) 05-30-2010, 09:58 AM

Ex,

I have not worked on an ERA so I would not know. (that is not a dig on ERA, they are great cars, I just have not worked on one) The OP asked about a SPF.

"quite a job" is pulling an engine, replacing a rear main seal, or a CV boot IMO. Installing a shifter is "<" any number of things on an SPF.

E