|
Windage Tray needed
Hi
Any body have a windage tray for the Aviaid oil pan they would like to get rid of? I need one for my build, got the pan just need the windage tray. Thanks |
Do you need the pan that bolts inside the oil pan or the tray that sandwiches between the pan and the block?
|
The tray that goes between the block and pan,
Thanks |
I use these http://www.summitracing.com/parts/FMS-M-6687-A390/
I put a hole in them for the pickup brace to go through. |
Try the source.
|
Good to see you on here John, this is probably the largest collection of people that should be using your stuff.
Jerry Clayton Keeling & Clayton California Charger |
The windage tray listed from Summit is listed as N/A (not availible). I had heard ford discontinued them.
John |
We make our own part from 16ga steel, weld in directional screen in the 4 rod throw windows, and make provision to bolt on our custom pickup. The assembly is then Cadmium, not Zinc, plated. The part is sized so that once everything is assembled you can lay a bead of clear silicone, our sealant of choice, on the gap between the pan and the block all the way around the outside, then with your finger smooth off the excess al the way around, just like caulking tile. If anything leaks once that's set up, it' sthe rear main seal.
Credit for that method goes to Tony at Keith Craft. |
| All times are GMT -7. The time now is 04:32 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: