Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   Source for Vinyl Protective Film to Use Under Softtop (http://www.clubcobra.com/forums/all-cobra-talk/109494-source-vinyl-protective-film-use-under-softtop.html)

wrogers55 03-05-2011 10:00 PM
Source for Vinyl Protective Film to Use Under Softtop
 
Anyone know of a good source for the cling type thick vinyl protective film that can be used under the rear of a soft top installation to protect the paint, then remove it by pealing it off and reusing it when needed.

I had some at one point that was bout 1/16 thick and was great stuff, would stick to any smooth surface, but need a new source.

Thanks,

tcrist 03-05-2011 10:15 PM
Internet search,

http://search.yahoo.com/search;_ylt=...p-qrw-corr-top

Seagull81 03-06-2011 07:41 AM
Wayne,
Could you glue some thick felt (color to match the top) to the bottom of the soft top? Then it would be there any time you want to put it on.

Fullchat289 03-06-2011 12:54 PM
Hi, Wayne:

I use Keith at Chuforiagraffix for all my vinyl needs. He can make you whatever you want. For my Lemans top, I asked him to cut some 1.5" X 12' clear adhesive paint protection film in 3' sections such that I could protect the paint from abrasion at the HT seal/body interface. Here's a photo after I laid it down:

http://i41.photobucket.com/albums/e2...p/DSCF1242.jpg

Here is Keith's website:

http://chuforiagraffix.com/

- Allen.

tcrist 03-06-2011 02:27 PM
You can get static cling material from McMaster-Carr.

STEVE-O 03-07-2011 05:22 PM
Quote:
Originally Posted by Fullchat289 (Post 1114238)
Hi, Wayne:

I use Keith at Chuforiagraffix for all my vinyl needs. He can make you whatever you want. For my Lemans top, I asked him to cut some 1.5" X 12' clear adhesive paint protection film in 3' sections such that I could protect the paint from abrasion at the HT seal/body interface. Here's a photo after I laid it down:

http://i41.photobucket.com/albums/e2...p/DSCF1242.jpg

Here is Keith's website:

http://chuforiagraffix.com/

- Allen.
Allen,
What did he charge to make that?


All times are GMT -7. The time now is 06:02 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: