MaxJax is Mine

[KirkV]

Well I found one 6 months old from a corvette forum that the guy sold his vette and took $1500 for it. Like new condition with a oil drain container to boot. Now I just have to get it anchored and make some pads to pull the cobra on to kake sure I get under the side pipes.

[FUNFER2]

That's great, I love mine.

Since my cobra is pretty low, I use four small ramps to drive on, so the arms/pads go under my side pipes. Works well.
(although, the first time I did, I let too much clutch out, and the rear ramps shot out like a gun into the street) lol

I bought these, but I got them on ebay for less. Their 4" tall, light weight, small & easy to store.

Plastic Car Ramps

Did he give you the manual ?

If you need any parts, let me know. Do you have the anchors that you'll need ?

I also recommend using epoxy in the holes before placing the anchors in and be sure to leave a 1/2" space between the top of the anchor and the surface of your floor, then tighten to specs.

[KirkV]

I have to get the anchors yet and I plan on using the epoxy anchors. I have the manual and agree that small ramps like those will do great. It appears I have all of the parts I need and the nice part was it was already assembled!

[FUNFER2]

Cool.
Even with my single stall garage, I leave it standing all the time and only put the pump/stand in a corner. It's really not in the way at all.

Since I had my, "Group Buy" for the lift, I sold enough here that they sent me the oil drain container that you have and the ATV kit for the arms, as a nice thank you gift, along with my lift. The container works great under the car.

Very nice people to work with, great company and high quality products.

[roarvette]

I love mine. I put a 4 ft. long 2X6 under the car so that the pads can reach the frame rail. It goes from side to side and adds enough lift to the pads to clear the side pipes. I hope that helps.