Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   ALL COBRA TALK (http://www.clubcobra.com/forums/all-cobra-talk/)
-   -   upper control arm bushings? (http://www.clubcobra.com/forums/all-cobra-talk/112938-upper-control-arm-bushings.html)

Dwight 10-15-2011 10:05 PM
upper control arm bushings?
 
I need a part number on the upper control arm bushings used on a nine year old B&B. They are after market tubular Mustang II arms.
They may be the same bushing that Shell Valley uses or several of the other companies.
The bushings measure 1.167" outside diameter and .625" inside and 1.4" long (wide).

I've tried a couple of parts store but you know the story, "make and model, please".

I contact B&B but so far they have not given me a part number. They did tell me they do not stock them because stopped using them a few years ago.

I am sure I can pick them up local if I knew the part number.

Can anyone help??

Dwight

Ralphy 10-16-2011 03:45 AM
Dwight,
I know your problem. You need to find out who made your control arms. If not, you can go to McMaster Carr and order urethane bar stock and have a shop make them. Thinking you need around 90 durometer.

McMaster-Carr

Ralphy

mickmate 10-16-2011 05:54 AM
Take a look at the 9.9111 here energysuspension.com | UNIVERSAL #1: Link-Flange Type Bushings, Universal Mounts/Isolatorss

Mark IV 10-16-2011 06:03 AM
If it is a steel slevved bushing, NAPA and most larger parts sources have a catalog that lists the bushings by dimensions. You can determine the P/N that way.

Dwight 10-20-2011 06:43 PM
control arm bushings
 
I checked a couple of part stores and they do not have them listed by size. We do not have a NAPA store close to me.
Could not find one on Energy Suspension site.

Somebody has to know. I think Shell Valley, Lone Star and others use the same bushing.

HELP

Dwight

mickmate 10-20-2011 08:15 PM
Check the outer diameter, it seems like a funny number. Take a look also at the 9.8116 here 9.8116 or just send them an e-mail or call them with your dimensions. You gotta be able to find it here Suspension Restoration Parts Co. - 4 - Bar bushings,Fabricators page

rustyBob 10-21-2011 08:42 AM
Dwight........sent you a PM....

Slow Dawg 10-25-2011 06:25 AM
Part # IW 4041CB, wholesalehotrod.com Where we used to get them.

Dwight 10-25-2011 03:46 PM
thanks
 
Thanks Slow Dog

I called and they are on the way. :)

Thanks

Dwight

Dwight 10-29-2011 02:55 PM
control arm bushings
 
Thanks Slow Dawg

I received the bushing today from International Whs. (Shell Valley).

Now I can put them in and get this Cobra on the road.

Dwight


All times are GMT -7. The time now is 05:40 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: