Buffer / Wax Advice

[Varmit]

Originally Posted by saturnkk

Mine is red with a the white stripes. I am concerned to use any type of polish that it might leave swirls or damage the clear coat or stripes eventually.

I was hoping to stick with just a wax protective coat to help guard against swirls and paint damage while still leaving a nice mirror shine....

I assume that these multi-step processes bing used are wash, polish, wax?!?

Go to the Adams web site. I had the same concern until I did a bit of research on the subject. I use a buffer with swirl remover, then polish with a buffer then use an applier for the Canuba, it comes out perfect under any light angle. Whe you use the buffer as directed, you will have no problems at all with swirl marks.