Windshield T bolts for soft top

[Steve Gallegos]

The other thing you could do is get two top bows from ERA. They have a pin in on the center end of each bow. The bow pin fits into the opening at the center of the windshield and the curved ends at the side of the window clamp down on clips on the side of the window like a regular top. I made a bimini top that attaches to the window as explained. I used the top brackes I had for the original top and put in side rods to hold the sides from flaping. I attached the back with two strips of material going to the pins that are behind the seat to pin down the real top. It works well to about 50mph, then starts to flap in the middle. I am going to run two stays across from side to side to stablize the middle.